How to add different manufacturer camera on the NVR?

To add other manufacture cameras to your NVR first you will need to get a firmware upgrade by
calling our support number 1 855 693 9849. Once the device is updated you will need a camera
that is ONVIF compliant with similar spe cs and the existing cameras. If everything checks out then
first;
1. Ensure that the camera and NVR are connected to the same network
2. Have the username and password of the ONVIF camera on hand
3. Know the IP address of the camera or assign it one
4. On the NVR go to Device Management and go to IP cameras
5. Choose the channel you want the camera to be on
6. Click on EDIT and change from Plug and P lay to MANUAL
7. Once it connects successfully a play button will appear . Click on the play button to confirm
that the video will play
8. Go back to the home screen and you will see your new camera along with the other ones

Supported NVR Models: CS - X4 - 104P, CS - X4 - 108P, CS - X4 - 116P

1080P and 4MP models only